The machine How does it work?
Preforms heating units are stacked by hand (holding the outer part of Preforms). Heat is transferred to after the blow and blow process is applied. After this, bottles, packaging or filling unit consisting sent.
| TECHNICAL SPECIFICATIONS | UNIT | EGM 2 | EGM 5 |
| Consideration the number of mold | Number | 1 | 1 |
| Maximum bottle diameter | mm | 100 | 185 |
| Maximum bottle height | mm | 300 | 300 |
| Cover diameter | mm | 25-38 | 25-42 |
| Bottle volume (*) | liter | 0.2-2 | 1-5 |
| Maximum capacity (**) | bottles / hour | 550 | 300 |
| Engine | kW | 0.25 | 0.25 |
| Heaters | kW | 12 | 12 |
| Service air (max 5.9 bar) | L/min | 100 | 150 |
| Blow air (16 bar) | L/min | 250 | 500 |
| Water inlet temperature | C° | 8-15 | 8-15 |
| Cooling capacity | kcal/hour | 5000 | 5000 |
| Size | mm | 1100 | 1350 |
| Width | mm | 950 | 1070 |
| Height | mm | 1370 | 1440 |
| Weight | Kg | 360 | 750 |
| Total installed power | kW | 12.25 | 12.25 |
| (*)-Optionally, to change. (**)-The shape of the die may vary depending on the volume of the bottle. |
| KAPASİTE |
0.2 L |
0.5 L |
1 L |
2 L |
5 L |
| EGM 2 |
550 bottles / hour
|
550 bottles / hour
|
480 bottles / hour
|
450 bottles / hour
|
—
|
| EGM 5 |
—
|
—
|
350 bottles / hour
|
320 bottles / hour
|
300 bottles / hour
|
Note: The above values may vary depending on the volume of the bottle shape of the die.
