The machine How does it work?
Preforms heating units are stacked by hand (holding the outer part of Preforms). Heat is transferred to after the blow and blow process is applied. After this, jars, packaging or filling unit consisting sent.
| TECHNICAL SPECIFICATIONS | UNIT | EGM 1K | EGM 5K | EGM 10K | EGM 20K |
| Consideration the number of mold | number | 1 | 1 | 1 | 1 |
| Maximum diameter of the jar | mm | 110 | 185 | 285 | 285 |
| Maximum height of the jar | mm | 200 | 300 | 470 | 470 |
| Cover diameter | mm | 38-100 | 38-115 | 100-115 | 100-115 |
| Jar volume (*) | liter | 0.2-1 | 1-5 | 5-10 | 10-15-20 |
| Maximum capacity (**) | Jar / h | 550 | 300 | 250 | 200 |
| Engine | kW | 0.25 | 0.25 | 0.25 | 0.25 |
| Heaters | kW | 12 | 12 | 32 | 32 |
| Service air (max 5.9 bar) | L/min | 100 | 150 | 250 | 250 |
| Blow air (16 bar) | L/min | 250 | 500 | 1500 | 1500 |
| Water inlet temperature | C° | 8-15 | 8-15 | 8-15 | 8-15 |
| Cooling capacity | kcal/hour | 5000 | 5000 | 5000 | 5000 |
| Size | mm | 1100 | 1350 | 1350 | 1350 |
| Width | mm | 950 | 1070 | 1500 | 1500 |
| Height | mm | 1370 | 1440 | 2000 | 2000 |
| Weight | Kg | 360 | 750 | 1250 | 1500 |
| Total installed power | kW | 12.25 | 12.25 | 32.25 | 32.25 |
| (*)- Optionally, to change. (**)- Of the die may vary depending on the shape and volume of the jar. |
| CAPACITY |
0.2 L
|
0.5 L
|
1 L
|
5 L
|
10 L
|
20 L
|
| EGM 1K |
550 concept / h
|
550 concept / h
|
480 concept / h
|
—
|
—
|
—
|
| EGM 5K |
—
|
—
|
300 concept / h
|
250 concept / h
|
—
|
—
|
| EGM 10K |
—
|
—
|
—
|
250 concept / h
|
240 concept / h
|
—
|
| EGM 20K |
—
|
—
|
—
|
—
|
200 concept / h
|
180 concept / h
|
Note: The above values may vary depending on the die shape and the volume of the jar.
