The machine How does it work?
Preforms carriers machine is packed by hand (holding the outer part of Preforms). Blow molding process, the preforms are blow after heat unit. After this is done with the help of packing or filling jars sent to the robot.
| TECHNICAL SPECIFICATIONS | UNIT | EGK 5 |
| Consideration the number of mold | Number | 1 |
| Maximum diameter of the jar | mm | 185 |
| Maximum height of the jar | mm | 330 |
| Cover diameter | mm | 63-105 |
| Jar volume | liter | 0.2-5 |
| Maximum capacity (**) | Jar / h | 650 |
| Engine | kW | 0.25 |
| Heaters | kW | 18 |
| Service air (max 5.9 bar) | L/min | 1500 |
| Blow air (25 bar) | L/min | 4000 |
| Water inlet temperature | C° | 8-15 |
| Cooling capacity | kcal/hour | 10000 |
| Size | mm | 2700 |
| Width | mm | 1300 |
| Height | mm | 1800 |
| Weight | Kg | 2750 |
| Total installed power | kW | 18.25 |
| (*)- Optionally, to change. |
| CAPACITY |
1 L
|
5 L
|
| EGK 5 |
650 Jar / h
|
450 Jar / h
|
Note: The above values may vary depending on the die shape and the volume of the jar.
